Videos you watch may be added to the tv's watch history. Take a look at our instructional video about how to put on a fingertip bandage.
Place the bandage over your cut and cross the bottom strips over each other on your finger so it looks like an x.
How to apply fingertip bandage. If playback doesn't begin shortly, try restarting your device. Using a pair of scissors, cut both adhesive strips down the center. Take the butterfly bandage and remove the backing to reveal the adhesive.
As soon as the bandage is on, ask if it feels too tight and check the circulation by pressing on a. Set half of the bandage on 1 side and pull it to the other side of the cut. Learn how to put a bandage onto a finger with the help of this guide from first aid trainer clive james.
Once the base of the applicator is just above the top of the finger twist the applicator round once; Press 1 half of the bandage. We can very easily make our special fingertip bandaid from a standard bandaid by using a clean pair of scissors (consider rinsing the scissors in desinfenctant (e.g.
Slowly pull off the plastic that’s covering the adhesive on both ends of the bandage. When to use a bandage: A bandage is sometimes used in the place of a splint or a cast to restrict the movement of a broken hand or finger.
Take off the backing, and place the pad on. Push the applicator back down the finger, so the bandage is double in thickness. Just as important, applying a fingertip bandage to the fingertip instead of a traditional strip bandage will protect the wound and stay on longer.
Use your thumb to hold the end of the gauze in place, and withdraw the applicator to the finger’s end. Unwind about 8 to 10 inches of coban™ wrap from the roll. Apply the rest of the fingertip bandage by pushing the applicator back over the injured finger.
You should aim the open end of the applicator at the base of your finger. Allow the strip of bandage to relax. Be very careful as you unwrap the bandage.
You can also use a safety pin, tape or a bandage clip. Alcohol) or heating is shortly with a lighter before use). You can apply the bandage around your finger in 2 ways.
Cutting the material this way helps to securely cover the tips of the injured finger or toe. Secure the bandage in place using adhesive tape. Hold the bandage at the base of the finger and slowly withdraw the applicator.
This video shows how to apply finger buddies tubular finger bandage to an injured finger. While gently stretching the bandage, wrap it again to make a second full turn, overlapping How do you apply a fingertip bandage?
The bandage should stick lightly to your fingertip at this point. The cut pieces should be designed to be twice the length of the finger or toe. Push the applicator back down the finger, so the bandage is double in thickness.
Cut a lengthwise slit in each end of the bandage (only through the sticky part, not the pad). Then, press the white center of the bandage directly onto the cut onyour fingertip. Medical gauze which are frequently used consist of some types, such as the impregnated—gauze covered with medications, the wrapping—the cotton, nylon, or elastic gauze used for padding or securing wounds, and the sponges—2×2 or 4×4 inch layered squares of gauze used for padding.
Then we can cut out a trapezoid shape at the long sides of the bandaid to leave the pad in the middle, and to obtain lateral plaster flaps that will. Cleaning, disinfecting and bandaging the fingertip properly will help speed up healing. Now, twist the applicator 360 degrees.
Peel off the plastic strips and press the center of the bandage on your wound. Hold the bandage at the base of the finger and slowly withdraw the applicator. However, a broken bone must be aligned before bandaging.
Unwrap and apply the bandage. Measure and cut the bandage to approximately three times the length of the finger. As with any elastic bandage, please apply the coban™ wrap firmly, but comfortably.